Hisense TV Red Light Flashes 6 Times (3-Min Fixes)

with 2 Comments

If the red light is flashing 6 times, this means that your TV is receiving power, but usually has a short or blown component on the power board.

Unfortunately, the Hisense TV blink codes you might find are not accurate, as the meaning of the number of blinks varies between models, and often means nothing in any case.

But most people will be able to diagnose and fix their Hisense TVs using the simple steps in this guide.



Hisense TV Red Light Blinking 6 Times Possible Causes

Cause Explanation
Software Glitch – If you have a newer model of TV, then it could be a glitch that can be resolved by power cycling.
Household Power Issue – Check your wall socket is supplying sufficient voltage.
– Check your TV’s power cord/socket isn’t damaged.
HDMI/Connected Device Problems – Remove all HDMI cables and re-test your TV.
– HDMI-CEC could be the problem if your TV now works.
Remote Not Working – Double-check that your TV’s remote is sending a signal to your TV.
Poor Connection in Internal Cable/s – The cable that connects the power board to the main board could have come loose.
– The cables connecting the T-Con to the main board can also either come loose or not make a proper connection, which can result in your TV not coming on
– This is a 10 minute fix.
Internal Component Failure – Component failure on the power board can prevent your TV from coming on to stop further damage.
– You can check for component failure with a multimeter and either replace the failed component or the entire board.

Power problems are the most common suspect if your red light is blinking six times when you try to turn your Hisense TV on.

We’ll go over detailed steps for how to fix this below, starting with the easiest fixes before moving on to hardware fixes if none of those work.


1. Power Cycle Your Hisense TV

Although this might seem a basic step, power cycling your TV is often the best way to fix your Hisense TV.

About 30% of people who contact me either through email, YouTube, or who leave comments here, fix their problem with a power cycle.

To power cycle a Hisense TV:

  1. Unplug your Hisense TV and hold down the physical power button beneath the IR receiver on the TV for at least 15 seconds.
location of power button for Hisense TV is beneath logo or at side
  1. Wait for at least 30 minutes for any residual power to drain.
  2. Plug your TV back in and try switching it on. You should see a red light come on once if you have been successful.
  3. It’s a good idea to try this a couple more times if it doesn’t work at first, as this can sometimes take a few goes to kick in.

Make sure you do wait for the full 30 minutes before plugging your TV back in – you would be surprised how long the components within your TV can hold a charge, and you want to make sure it has fully reset.


2. Does Your Remote Work?

If the red light is blinking 6 times, this means that your TV is receiving power, but there is a chance that it’s not responding to you because your Hisense remote isn’t working.

Remote control problems are unlikely to be the cause, but it’s worth checking just for completeness.

hisense tv remotes

If you are using an IR remote, then confirm that you have a good line of sight to your TV.

hisense ir remote

If you are using an RF remote, confirm that it is connected to the same local network as your TV.

Don’t forget to check the batteries in your remote, replacing the existing ones with brand new batteries if you have no way of checking them.

For IR remotes, it’s possible to check if the remote is working by using your smartphone’s camera.

Simply point the IR transmitter on the end of your remote at your phone’s camera and you will see a red light appear when you press any button on the remote.

checking if a tv remote is working

This doesn’t work for some cameras though, notably some iPhones, so check with another remote that you know works if in doubt about your camera.


3. Remove Any Surge Protectors

In about 10% of cases, a fault within your household power supply, or more specifically within the surge protector or smart plug that your TV is plugged into is the cause of the problem.

To thoroughly test your power supply:

  1. Unplug your Hisense TV from your wall socket.
  2. Remove any surge interrupters or smart plugs so that you have a direct line to your wall socket.
  3. Plug another large device that you know works into the same socket and check that the new device works as normal. (It’s important that this device draws approximately as much power as your TV, to confirm the socket is fully working).
  4. Remove the other device and plug your TV back into this socket.
  5. Switch on the power and switch on your TV using the physical power button located somewhere on its case (usually beneath the Hisense logo).
  6. See if the red light is solid. If so, this means your TV is getting sufficient voltage.
  7. If your Hisense TV’s red light is blinking 2, 3, 4 times, or more, then repeat these steps with another wall socket to confirm your household electricity supply isn’t a problem.

You should also look at your power cord for kinks and knots in the power cable, which can damage the copper wires both mechanically and by increasing the electrical resistance, which generates heat, causing damage that may not necessarily be obvious.

Because of potential damage within the cable that you cannot see due to the protective sheath, it can be a good idea to use a new power cable, if you have one or can borrow one.

Also, be sure to carefully look at the power connector on your TV to confirm that the port is free from corrosion, dirt, and dust.


4. Change HDMI Settings

There’s a strong possibility that a poorly seated cable is automatically switching inputs on your TV, but as it’s not fully connected, it isn’t able to supply a signal and so it looks like your TV isn’t working, with the red standby light flashing 6 times.

HDMI problems affect about 5% of users.

This comes down to either a:

  • Faulty HDMI cable with a break in it
  • Damaged HDMI port with broken pins
  • Poor HDMI connection where the cable and connector are not fully making contact
hisense tv hdmi cable

Start by removing all HDMI and other cables apart from your power cable, then switch your TV on.

If you are now getting a picture, then:

  1. Take a look at any HDMI or other physical cables that were connected to the back of your TV.
  2. If you have any compressed air, use that to clean the contacts both of the cable and in the connector on the TV. If you don’t have compressed air, then blow gently on them.
  3. Make sure your TV is off, then firmly push the cables back into their slots on the TV.
  4. Switch your TV back on again.

If that hasn’t fixed the problem, then try using a different HDMI input. Most TVs have 3 or 4 HDMI ports.

If you have one that is on a different part of the TV then that would be the best one to try, as this should have a separate connection to the TV’s main board.

hisense tv hdmi port

If your TV is now working, it could be because a flaw with the HDMI-CEC settings can stop your TV from coming on properly if you have other devices, particularly game consoles, plugged into your TV.

HDMI-CEC allows two-way communication between your TV and console, allowing your console to switch your TV on and off automatically.

The problem is that if you do not switch inputs on your TV away from your console’s input before switching off your TV, then your TV will not “listen” to your remote, and will instead just blink its red lights and not appear to do anything.

To switch off HDMI-CEC on a Hisense TV:

hisense tv switch off hdmi-cec
  1. Press Home on your remote.
  2. Scroll to the Gear Icon for settings.
  3. Then Display & Sounds.
  4. And HDMI-CEC device control.
  5. You can switch it off by setting ARC/eARC to No.

5. Look for Power Failure

If you’ve checked external connections, then all that’s left are internal connections, and in particular the power board and voltage inverter for the backlight.

Burned-out components on the power board are the most likely cause of blinking red lights on your TV.

These are hidden away inside the case of your TV and can be checked for failure by simply taking your TV’s case apart and using a multimeter to check that voltages are correct across the boards.

tv main board
tv power board

You should note that this invalidates your warranty, so if you bought your TV in the last year, then contact Hisense to have them fix it.

Out-of-warranty fixes are likely to run $200 – $400 to check and replace a main board, but if you do it yourself, you are looking at around $30 – $50 in parts from eBay.

Troubleshooting the main board and power board is easiest to see in video form, so take a look below for the full details on doing this.

CAUTION
Opening up your TV is potentially dangerous due to the risk of electric shock. If you are not confident in your skills, do not proceed.

The two things that you are looking for are:

  1. If there is power received by the power socket on the power board, and if all components are receiving power from this.
  2. No components are showing signs of damage. Particularly look at capacitors as these are prone to swelling after power surges which causes them to fail.

If both the power board and main boards look OK, then the most likely problem is a failure of the backlight inverter.

This powers the backlight of your TV by uprating the standard voltage and current of your home supply to the higher levels required by the backlight.

It’s a very small board in most TV models (although in some is integrated into the power board). Check this board with your voltmeter, and don’t forget to also look at the cable.

These boards are only around $10-15 on eBay, so are very cheap to replace if they have failed.

tv inverter board

If this is also fine, then you should concentrate on the backlights themselves.

Many models of Hisense TVs will fail to come on with the red light blinking six times if there is a failed individual backlight or backlight strip.

Backlights on modern Hisense TVs come in LED strips of varying lengths. Older models used lengths that spanned the entire frame of the TV, but due to cost savings, more recent TVs use a set 16″ LED strip which is connected in series for each row to span your TV.

hisense tv led backlights

These cold-soldered connectors are a notorious failure point on Hisense TVs but can be easily fixed if you are willing to re-solder a joint yourself.

Equally commonly, the LED backlights themselves can fail. This is due to repeated current overpowering, which over time causes thermal degradation of the LEDs leading to burnout.

You can replace any failed LEDs by just removing the entire strip and replacing it.

The problem with fixing the LEDs is that they are located in the most difficult-to-access part of your TV. So if you are not comfortable with a larger repair job, then now is a good time to seek help from a professional.

You need to remove the back panel, remove all of the circuit boards and connectors, then another layer of screws for the front panel, and only when you have fully removed the LCD panel can you get to the backlights.

You will also need a multimeter or TV backlight tester to test the backlight strips to find out where the problem lies.

Assuming you have followed the steps to check the Power and Main Boards:

  1. Any wires or ribbons that are near the edge of the TV should be disconnected.
  2. Then remove the screws around the edge that hold the bezel of the TV.
  3. With some care, you should be able to remove the bezel, and panel and reveal the TV backlight underneath, which will be in strips of LED lights.
  4. Use a multimeter or TV backlight tester to check whether they are working, and replace any failures

It’s also possible that one of the connectors linking the LED strips as they span the width of your TV has failed. This can be fixed by checking the connectors with a multimeter and re-soldering any broken connections. This article has a good study on this.


Hisense TV Support and Warranty

It goes without saying that if you are still within the one-year warranty period, then you should contact Hisense, who will most likely come to you and simply replace the panel in your TV.

You can call Hisense on:

  • 1-888-935-8880 (Mon – Fri, 9am – 9pm EST & Sat – Sun, 9am – 6pm EST)

Even if Hisense won’t fix your TV, they might still offer you a discount on a future model if you pester them hard enough! This is always worth a try in my experience.


Hisense TV Red Light Flashes 6 Times Troubleshooting Quick Tips

  • The most common cause of a red light blinking 6 times on your Hisense TV is a component failure on the power board, but main board component failure cannot be discounted.
  • Use a multimeter to check the components if there is no obvious sign of burning or damage.
  • Before opening up your TV, run through a power cycle, and check the HDMI connections and your household power supply, to ensure one of these simpler-to-fix causes is not the root of the problem.

I’m confident that these steps will fix your TV, although the later steps do require a bit more effort than the earlier ones.

Don’t forget that opening up your TV will void its warranty, but this can’t be helped in most cases.

If you need any further help, then I suggest contacting Hisense support directly or checking on YouTube where it’s much easier to see how to open up your TV, for example.


Read More:

Hisense TV sound but no picture fix

Hisense TV red light blinking?

Hisense TV red light blinks 3 times?

Hisense TV red light blinks 2 times?

Follow Tim Daniels:

Hi, I'm Tim Daniels, photographer and photo trainer, founder of Lapse of the Shutter and creator of the totally free Lightroom Develop System. I've travelled to (probably) 30 countries over the last few years, taking photos and licensing them around the world, and creating lots of free photography learning resources. Read More ...

2 Responses

  1. Mark belanger
    | Reply

    Hisense tv are garbage low of the lowest TV on the market. Cheaply made I purchase one and it lasted 6months and boom no TV one nite just shut off.reset everything possible. And the kisser of it when I got it I gave my other TV to a neighbor because he didn’t have one. And look how OUT IN THE RAIN,me.now I have to spend money I don’t have.the end of 2023 Dec 30.what awaits me in 2024?

    • Tim Daniels
      | Reply

      Sorry that happened, but 6 month old TVs should still be in warranty, at least from the shop where you bought it?

Leave a Reply